Proton Owners Club UK
http://www.protonownersclub.co.uk/forum/

E6 Alloys, please keep an ear out.
http://www.protonownersclub.co.uk/forum/viewtopic.php?f=13&t=28080
Page 1 of 1

Author:  HOL [ Thu Jun 04, 2015 9:17 ]
Post subject:  E6 Alloys, please keep an ear out.

Hi guys,

Would appreciate if you could all keep an ear out for a set of standard E6 alloys.

I need a set for my 5 stud conversion and they are proving hard to find. I have E7 alloys, but they are a little wider and I don't think they will fit, so Id rather the thinner 6 ones.

I tried a breakers local to me, and he wanted £475 and I could probably get aftermarket rims for that.

Thanks

Author:  Gazzor [ Thu Jun 04, 2015 19:27 ]
Post subject:  Re: E6 Alloys, please keep an ear out.

What about Honda ones they will suit as wont be as wide and will be 114 x 5, will keep my eyes open for you

Author:  Gazzor [ Fri Jun 05, 2015 18:10 ]
Post subject:  Re: E6 Alloys, please keep an ear out.

E6 breaking here https://www.facebook.com/photo.php?fbid ... =1&theater

Author:  HOL [ Fri Jun 05, 2015 21:16 ]
Post subject:  Re: E6 Alloys, please keep an ear out.

Thank Gary,

I have clocked those ones, but I'm looking for unpainted ones at the moment.

TME ones would be nice though!! [-o<

Author:  Gazzor [ Sat Jun 06, 2015 9:01 ]
Post subject:  Re: E6 Alloys, please keep an ear out.

I had a spare set of TME ones that I sold recently, are you a paid up member on the MLR ?

Author:  HOL [ Sat Jun 06, 2015 9:08 ]
Post subject:  Re: E6 Alloys, please keep an ear out.

Been on the MLR since 2001, but don't go on there enough to justify paying their annual fee.

I can and have posted on Wanted though.

Author:  Gazzor [ Sat Jun 06, 2015 10:49 ]
Post subject:  Re: E6 Alloys, please keep an ear out.

Im paid up so will check the adds for you

Author:  HOL [ Sun Jun 07, 2015 9:41 ]
Post subject:  Re: E6 Alloys, please keep an ear out.

What would a fair price for set of TME alloys with two good tyres?

Author:  Gazzor [ Sun Jun 07, 2015 11:16 ]
Post subject:  Re: E6 Alloys, please keep an ear out.

Sold mine for £250 but was told it was too cheap, I wouldn't pay more than £400 and that's only if they don't need a refurb, you can get new alloys for less, ok without tyres but even so

Author:  Gazzor [ Mon Jun 08, 2015 19:09 ]
Post subject:  Re: E6 Alloys, please keep an ear out.

What about these ?

https://www.facebook.com/photo.php?fbid ... =1&theater

Author:  HOL [ Mon Jun 08, 2015 19:20 ]
Post subject:  Re: E6 Alloys, please keep an ear out.

I'm getting a fail on that page?

I have two possibilities on the go.
A set of TMEs
A set of standard sixes.

I might get both yet and keep one set for track tyres.

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/